How to Make your own Canvas Prints with Mod Podge

This post may contain affiliate links. Please see my full Disclosure Policy for details.

I feel like a broken record lately, but I have been in the process of covering some of the white in our apartment.

Canvas Prints using Mod Podge from thelovenerds

I came up with this idea because it would cover a large space but also because it would allow me to showcase some of our nerdy interests in what I consider a nicer, subtler way (instead of the big Call of Duty poster my husband hung in his old apartment). How many of the nerdy interests can you identify? Some are more obvious than others.

In picking out the prints, I did a google search for what I wanted and made sure to be able to find prints of a large enough size. Then, I went to the Office Max print site and use the “Prints and Copies” section which allowed me to upload the images and print to a store location. The most important thing to note about their program is that black and white is default. You need to go in for every image and change it to color ink and the desired type of paper.

Canvas Prints using Mod Podge from thelovenerds

My husband liked these so much that he also wanted me to make some for his work office. These prints focus on where he has lived and the schools he has gone too. He couldn’t help but also include a bit of Star Wars in the mix as well.

Canvas Prints using Mod Podge from thelovenerds

Materials:
Canvas (I used thin canvas boards for this project)
Mod Podge (I use the matte)
Brush or Sponge brush for Mod Podge
Something to pour your Mod Podge in
Prints (I ordered from Office Max)

Before I get started on the process, I want to take a moment to talk about the prints. I decided to print mine at Office Max. I knew that I would be able to use their prints without the ink smearing from the Mod Podge. I have since heard some other alternatives that I haven’t yet tried. A few people have suggested that if you use an acrylic sealer on top of a inkjet print before applying the Mod Podge on top that the ink won’t run. Has anyone tried this?

Now, back to the process – I cut the prints down to the correct size. I found that it is easier to error on a little larger than cutting too small. You can always take a blade and cut off the excess later.

Then, I put a consistent layer of Mod Podge on the canvas. You don’t want to put to thick a layer on so make sure it is smoothed out with no clumps.

I start with one edge of the paper on the canvas – making sure it is print is lined up evenly – and start smoothing it on. You want to avoid bubbles, so the idea is to slowly smooth the paper onto the canvas. The key is to have patience – which is always a struggle for me.

Then, you will be putting two layers of Mod Podge on top of the paper and tile about 20 minutes apart– you are sealing and protecting the paper. Again, you don’t want it to be too thick or have any heavier spots. You want to go for consistency. I also recommend putting the two layers on in opposite directions (so one layer will go on vertically and the other horizontally). Doing this will help prevent the Mod Podge from looking too thick on top of the image. Wait 20 minutes until moving on to the next step.

NOTE 1: If you are not familiar with Mod Podge, it will look white when you apply it like in the picture, but it will dry clear. I have found it to still look white after 20 minutes before, wait until it is clear before moving on to the next step.

NOTE 2: I have found that sometimes, no matter how careful I was in putting on the paper originally, I get small bubbles in the later steps. Once it has dried, press down on the bubble and it should smooth out again.

 

This project has been featured on If It’s Not Baroque!

I link up to the following parties, including Serenity NowShabby NestWhipperberryHomecomingHomestories A to ZFinding Silver PenniesOrganizing Junkie, The Weekly Creative, and the Monthly Pinterest Challenge.

Comments

  1. Casey (mrs evil) says

    LOVE this idea! We are about to shuffle the kids’ rooms around and this will be brilliant for their room – I’m thinking comic book covers… yes!

  2. Kristyn says

    Hello! i am new to the printing world and i am wondering what size prints you ordered from office max and what size canvas’ you used! also, you said you wanted to make your pictures large enough in size. What do you consider large enough? Thank you so much, this is an amazing nerdy idea!

  3. Lauren says

    I am featuring your canvas prints today on my blog. I love this idea. I did something similar in my office with the album covers. I plan on doing something like you did in our living room with things we like. Thanks for linking up. The next link party starts in a little bit. I hope to see you again.

    http://www.ifitsnotbaroquedesignblog.blogspot.com/

    • lovenerdmaggie says

      Thanks again for featuring, Lauren! If you decide to do some for your living room, I would love it if you shared with me. I have already linked up for this week’s party with some turkey burgers with pesto cream cheese spread and washi tape detailing on a wood letter.

    • lovenerdmaggie says

      I am SO sorry I haven’t responded earlier. Thank you for the kind works on the project and for the nomination! I have been out of town for my FIL’s birthday, but I can’t wait to settle down and do my portion of the award. Thank you again, Abby. Your support means the world. 🙂

  4. Danielle says

    These look fantastic. I can see why your husband wanted you to do more for his work office. Thanks for sharing at Silver Pennies Sundays! x

    • lovenerdmaggie says

      Thanks, Danielle! It was a really easy and pretty inexpensive way to add a lot of color.

      Thanks for stopping by!

    • lovenerdmaggie says

      Thanks, Amy! It is such a great and easy project. If you try it out, I would love for you to share your version with me. Have a wonderful weekend!

Leave a Reply

Your email address will not be published. Required fields are marked *

Copyright © 2024 · Custom Design by How Sweet Designs

Send this to a friend